China Largest Welding Gauge Manufacturer ROK International Industry Co., Limited
The products including :
CAT 1# Hi-Low Welding Gage:
The function of the gauge:
CAT #2 ECONOMY SINGLE PURPOSE HI-LO WELDING GAUGE
1. unlock the retaining screws. Press the gage legs beyond the barrel.
2. insert the legs ( wires ) into the root gap space of the two pieces of pipe to be fitted. Turn the gage 90 º, being careful to apply a constant back pressure to the barrel.
3. Hold the gage as square as possible with the fitting to obtain an accurate reading. Lock the retaining screw, Reverse the 90º turn and remove the gage. You've now ready to read the increment opposite the red line.
4. When the red line aligns with the 1/32 increment you have a good internal alignment and fit-up. Misalignment can be determined from the zero line by increment markings of 1/16 inch.
The products including :
CAT 1# Hi-Low Welding Gage:
The function of the gauge:
Measures internal alignment of pipe after fit-up/alignment, cuts radiographic rejects
Measures internal misalignment of pipe before and after tracking
Measurement Scale: Inches on one side and Metric on the opposite side
Mateiral: Stainless Steel
Measurement Scale: Inches or Metric (specify when ordering)
Root Weld Space
Eliminates Rejects – Improves Productivity
Internal Misalignment
You can check the internal alignment of your fit-up quickly with the WG-2 HI-LO Gage.1. unlock the retaining screws. Press the gage legs beyond the barrel.
2. insert the legs ( wires ) into the root gap space of the two pieces of pipe to be fitted. Turn the gage 90 º, being careful to apply a constant back pressure to the barrel.
3. Hold the gage as square as possible with the fitting to obtain an accurate reading. Lock the retaining screw, Reverse the 90º turn and remove the gage. You've now ready to read the increment opposite the red line.
4. When the red line aligns with the 1/32 increment you have a good internal alignment and fit-up. Misalignment can be determined from the zero line by increment markings of 1/16 inch.
CAT #3 ADJUSTABLE FILLET WELD GAUGE
CAT #4 BRIDGE CAM GAUGE
The following measurements are possible in either inches or millimeters: Angle of Preparation, Excess Weld Metal, Depth of Undercut, Depth of Pitting, Weld Throat Size, and more.
Unequal Leg Measurement Feature
Measure Fillet Weld & Weld Throat Thickness, Available in Inch or Metric
CAT #4 BRIDGE CAM GAUGE
The following measurements are possible in either inches or millimeters: Angle of Preparation, Excess Weld Metal, Depth of Undercut, Depth of Pitting, Weld Throat Size, and more.
CAT #9C SKEW-T FILLET WELD GAUGE
Check Angle of Vertical Member, Weld Acute Side, Weld Obtuse Side, Available in Inch or Metric
